Last Saturday at La Laiterie was a techno party with spanish star dj’s Gabriel d’Or & Bordoy. Bazik all night long and people really love that !
6 hours vj set with this set-up : Bazik, Resolume & Millumin for the video mapping. A Novation Launchkey Mini midi as controller.
More details on the forum board : https://bazik-vj.com/support/forum/#/discussion/48/clubbing-gabriel-d-or-bordoy-la-laiterie-france
TouchOSC is a mobile app for iOS and Android. You can use it to control compatible softwares via your iPad or your iPhone. Your device become a cool remote for your desktop app.
As Bazik supports OSC, it allows you to control Bazik without being in front of your computer. In this tutorial, I’m using an iPhone, but it’s working with an iPad.
Select a color bank, modify parameters, shift, switch, break and play with preset pads. Get a complete control of effects part and active or unactive automation.
It seems tedious, but it’s worth it !
1. First, be sure your computer and your iPhone are on the same Wifi network. If you don’t have one around you, create it from your computer.
2. Please install the TouchOSC app on your device.
3 .Download the special layout below.
4. Copy this layout on your iPhone with iTunes. Get help on TouchOSC website.
5. Launch TouchOSC, then choose this layout.
6. Go to Connections / OSC and edit the Host adress.
Your Host adress must be your computer adress on the network. To find it, go to your Network preferences and check your IP address. Be sure it’s your IP address in the same network than your device (wireless).
7. Now launch Bazik, and open the Options panel.
8. Copy the TouchOSC’s “Local IP address”…
… and write it into Bazik’s OSC first big field.
Now insert Ports Outgoing and Incoming (generally 5000 & 5001) in the small fields.
9. Click “setup OSC” and go to the Controls panel. Try to change a parameter in Bazik or in TouchOSC : Now you can control Bazik with your Iphone !
Maybe Bazik is going to prevent you about incoming connexions. Please Allow that, so TouchOSC can send data to Bazik.
You don’t have to be a expert, but run TouchOSC requires time and patience. Follow the steps quietly and you will succeed.
OSC remote work in both directions. If you change a Fx value directly in Bazik, the remote must be update in realtime. If not, it’s probably a error with the remote adress in Bazik (check step 8).
Yes, you simply have to create a local network from your Mac and connect your device directly on it.
First, be sure your computer and your device are on the same network. And be sure you use the good IP address from your computer in this network.
With TouchOSC, sometimes, the Local IP address need time to be update if you just change your network preferences. Try to relaunch the app and check if the address has changed.
If you have a doubt with your Bazik configuration, try to use TouchOSC with another software and come back when it’s work, so you can understand what is the problem and solve it.
You can find more help on the TouchOSC website.
Just some words to say thanks to Resolume team that support and promote Bazik
Bazik was create as a visual plugin for this type of vj software, and it’s really cool to have some feedback and support.
“We just had an excellent time playing around with Bazik. All of the fun of generative visuals, with a simple interface that was designed with performance in mind. Well worth your time !” Resolume team
Jl Vision present his AV show during Uto Karem dj set using Bazik among others softwares for text animation and movie loop playback.
We also need some VJ Software to have some visuals at our performances so here goes the Bazik software for PC. I have nothing against Windows, but I assure you adapt a Windows application is not the easiest thing in the world. There is more work to do, but the essential is there : an app for easily visualize his music during a show, a concert or dj set, Windows compatible.
Spout and GLSL preset are coming soon.
Download and feedback, please use the forum board.
Theorie is a techno party mixed by Steeven B at Studio Saglio / Strasbourg / France.
Bazik is running all night long stand alone and generate visual in real time, projected on a semi transparent screen for a really fun hologram effect.
Points cloud, 3D architectures and particles system ! 8 new files prepared by Taktik. Just drag them into Bazik and enjoy.
Download link : glsl-pack-02
Require version 1.02.
Enjoy the power of shaders in Bazik !
Comments welcome !
Today’s topic comes from a thread on reddit: “Some websites are reasonable, $15 for 20 loops… but head over to Resolume.com and you’ll find $90 for 25 loops or VJLoops.com and a single 720p loop is $9 (royalty free license). How the hell can these people justify charging that much? I get it takes time […]
Starting Out as a VJ Some people may be completely new to VJing or just getting started. What would you suggest they do to get started? Well.. learn the basics such as the technical things, find the hardware & software that suits you, sharpen your sense of art and practice. When did you start VJing and what […]
Did you know that you can stack duplicate effects to create generative VJ Loops in Resolume? In today’s VJ tutorial we’re going to continue showing how beginners can create easy generative VJ loops using nothing but Resolume and it’s built in effects. Creating Your Own VJ Loops (Even If You Know Nothing About Animation) This tutorial […]
The post Resolume VJ Tutorial: Beginner VJ Loops Using Duplicate Effects appeared first on Zero To VJ.
Should VJs Use Beeple Clips? “No Beeple. Unless it’s a clip he released this week or you can really hide it. Everybody’s using those clips and have used them forever.” There are some interesting comments whenever Beeple is brought up for VJ Loops. Go on forums and you’ll notice lots of VJs start out by […]
There are a lot of threads from new VJs asking about the best way to get started VJing. While some of the advice may be useful, it can quickly become an overwhelming avalanche of information. What’s Projection Mapping?? Midi vs. OSC?? Is there a standard when it comes to VJing?? Instead of giving you more things to learn, I’m […]
The post New VJs: 5 Distractions That Actually Keep You From Starting appeared first on Zero To VJ.
One of the biggest challenges for VJs is organizing their VJ loops. Which files are encoded properly? How long are these clips? What’s the resolution? Unlike DJs, VJs don’t really have any software like iTunes that’s designed for organizing their media. This usually leaves VJs to organize their content using boring old folders, lame. Today […]
The post Organizing Your Resolume Clips With Smart Folders (macOS) appeared first on Zero To VJ.
The Resolume team dropped some exciting news earlier this week, Resolume 6 is currently in beta and it’s available to download now. There’s a lot of new improvements but today I’m going to focus on 6 new features that I think are really sweet for Resolume VJs. New Features In Resolume 6 Beta 1. 64-Bit […]
Resolume 6 Beta was released last week and it added an amazing feature, Ableton Link. This feature makes it really easy to VJs to quickly sync to DJs and use BPM synced visual effects. If you work with DJs you’re going to love this. Today I’m going to explain what Ableton Link is, how it works, […]
During a Facebook livestream on Zero To VJ someone asked a question about setting up Traktor with Resolume. …I was trying to get some video to auto-sync with Traktor through Ableton. I’d MIDI clock out of Traktor into ableton, and have a clip with 1/4 notes that would then BPM into arena. But, now, it […]
Today’s article is inspired by some questions around audio reactive visuals/effects in Resolume. Hi , so i VJ mostly on psytrance partys , and i find it difficult to use sound input for example in Resolume 5 as it just can’t distinct the beat or melodys in this style of music , it’s just too […]
Lines is an abstract architectural mapping show which took place on the facade of the Palace of Parliament in Bucharest, which is the second largest administrative building in the world, with usage of more than 104 projectors over 2.000.000 ANSI lumens, on 23.000 square meters of projection surface. It has been billed as the biggest projection […]
Due to contemporary life dynamics we all get bored very quickly. That’s why we are always looking for something new. We like to challenge ourselves and experiment with new ideas, that not only demonstrate graphic excellence, but create one of a kind experience for the audience. An adventure in the depths of the mind. Our […]
IAIA | Institute of American Indian Arts in New Mexico, USA, 2015 Fiske Planetarium – University of Colorado Boulder in Colorado, USA, 2015 BioInspire is an A/V dome performance which has screened in the Institute of American Indian Arts(New Mexico, USA) and Fiske Planetarium – University of Colorado Boulder(Colorado, USA). Artificial neural networks(ANNs), a largely […]
This is the A/V mapping piece we made for the Artvision Modern in Moscow. This project was inspired by the study “The colour currency of nature” by the scientist Nicholas Humphrey and the experiments he made according to the red colour. “Colour vision can and almost surely has evolved alongside signal colouration to enable animals […]
Hong Kong Tourism board annual summer show PULSE. The show’s family focused story is a unique take on how much fun and excitement can be had in the city of Hong Kong in the Summer. With iconic characters inspired by traditional local food favourites such as the Pineapple Bun, the Egg Tart and Dim Sum […]
Le Comte & Joanie Lemercier audio visual performance Premiered at Les Garages Numériques Halles Saint-Géry, Brussels November 2016 Le Comte & Joanie Lemercier from Joanie Lemercier on Vimeo. laser: Minuit Une video: Pablo Crutzen Diaz additional footage: François Dubois production and booking: Juliette Bibasse joanielemercier.com
KEEP YOUR SHOW LIVE, WITH GENERATIVE GRAPHICS, AUDIO REACTIVITY, AND RESPONSIVE TRIGGERS. Get up and running in minutes with 40+ built-in scenes. Built-in audio algorithms automatically turn music into visual action. Powerful, midi mappable controls over visual effects. Import your own images and videos to transform with shaders. Shader importing to add fresh content to […]
STARDUST – Video mapping on Berlin Cathedral, Festival of Lights 2017. Between 6th and 15th of October we had the honour to be selected at one of the biggest festivals of the genre, Festival of Lights Berlin. The theme of this year’s contest for the Berliner Dom was “Creating Tomorrow”, and through our project, STARDUST, we wanted to emphasize […]
Zhee-Shee production 13-th Festival of lights in Berlin 1-st place, winner of the jury award Second place by public voiting Zhee-Shee production | Festival of Lights Berlin 2017 from zhee shee production on Vimeo. Our best team: Director: Artem Shcherbakov Sound: Gleb Mordovtzev CG-arists: Lenar Singatullov, Nail Gaynullov, Alex Orlov, Alexander Korshakov, Petr Shkolniy, Alexander […]
The post Zhee-Shee production | Festival of Lights Berlin 2017 appeared first on LUMEN.
DL interactive audiovisual installation Dlectricity Festival 2017 | Detroit | September 2017 mayer+empl project 2017_099 mayer+empl . DL . interactive audiovisual installation . detroit . 2017 from sinsynplus on Vimeo. mayer+empl architectural space intervention http://www.mayerempl.de/ http://mayerempl.wordpress.com/
The post mayer+empl . DL . interactive audiovisual installation . detroit . 2017 appeared first on LUMEN.
We have two news for You.
First, Mapio has been updated to version 2.2.9.
Second, very soon will be available Mapio 2.3 Beta. These are some of the new features: synchronized video playback local and across multiple machines in a network; Customized Keyboard and MIDI control; Snapshots of mapping configuration; Audio files support; Free-form sensor based on lines and bezier curves (for pixel-mapping); Mixer with crossfader; NDI support; Kinect 2 support.
At the moment, will be available Windows version only. There is a desire at all stop supporting macOS platform.Unfortunately, we do not have enough resources to provide proper quality on both platforms. What do you think? Please vote here, it will help us make the right decision.
-removed support for hardware acceleration of DXV codec.
*fixed vertical flipped video files with raw codecs (not compressed).
*fixed multi-segment output for one strip of Pixelpusher.
*fixed auto-pixel-mapping with some skipped pixels when scanning.
*fixed duplication of pixels number in auto-sensors after each loading or refresh state of UI.
*fixed preset’s loading of matrix sensors in Pixel-Mapping panel.
*fixed rare QML crash (more accurate sync of threads).
*fixed copy&past elements in a group and added “copy” word for the name of elements
*fixed network video stream did not resume after stopping.
*fixed ALT and SHIFT modifier for the transform tool.
*fixed a white rectangle on a label of the slice when enter name shorter than 3-4 symbols. Added check on the empty name of the slice.
*fixed antialiasing of slices.
*tuned the timing of loops (time between the last and the first frame)
*fixed crash on DX/GL interop feature testing for DXVA codec and AMD GPUs
*fixed GUI playing state in the playlist after loading and in some other cases.
*fixed in performance settings window the default number of decoding threads for the video file. And was set the max value equals to the number of logical cores minus one.
*the window of Multi-Display and Pixel-mapping do not show now after loading a project.
*fixed behavior of tools with hidden slices.
*fixed mouse hover detection of masks contour.
*fixed muted sound on the first start of a clip in some cases.
*fixed muted sound of new network source.
*fixed muted clips starting with sound.
*fixed media files buffering and audio playing sub-system(it fixed sound clicks in some cases) [win] *fixed aspect ratio in 3d import.
*fixed hang of sending a feedback report in some cases.
*fixed leak of mutex in syphon source [mac os] *fixed lost FFGL [mac os] *fixed multi-display window is not topmost window[mac os] *changed FPS count behavior (side effects – FPS is not displayed if there is no output.)
*updated Qt to 5.6.2
*updated Decklink SDK to 10.7
After a long (or, rather, far too long) period of beta testing, we are happy to introduce you our new 2.3.0 release. It contains a bunch of new features, important changes, and improvements, so we´d better name it the new major 3.0 version. However, we value our users. Especially as for the 3.0 version we have planned even more awesome changes. That’s why this is the 2.3.0 version.
Crucially, this release includes full documentation for the software both in English and in Russian. It has so badly lacked it since the first releases!
Unfortunately, the new version is released for Windows platform only. We had to focus on one platform to be able to provide the highest quality product. Furthermore, the news on Apple’s professional hardware haven’t been optimistic in recent years, and this became an extra push to stop supporting macOS platform (probably, temporarily).
Before long we are going to share several video clips to conveniently show you all the new features. Stay tuned!
Highlights of the 2.3.0 version: